Fire

SPW01 Spatial and physical characteristics of bison wallows on Konza Prairie since 2011

Abstract: 

The objective of this study was to characterize spatial and physical attributes of bison wallows at the Konza Prairie Biological Station in northeastern Kansas.  We used aerial imagery from two different years (2011 and 2019) to assess the abundance and spatial distribution of wallows in relation to fire frequency, elevation, and slope. We also recorded physical characteristics for a randomly selected subset of wallows (n = 966) and analyzed these data in relation to the same landscape features.  Results indicate that wallows are more abundant on areas characterized by combinations of more frequent burning, higher elevations, and little or no slope.  Wallows were smaller in areas burned more often and shallower at higher elevations, particularly when located on grazing lawns. Terrestrial plants were found in approximately 72.1% of the wallows sampled, and their prevalence increased with increasing slope.  We found some quantity of aquatic plants in approximately 7.1% of the sampled wallows.  The probability of finding aquatic vegetation in wallows was higher on grazing lawns and in areas burned less frequently, particularly every 20 years.

Core Areas: 

Data set ID: 

171

Additional Project roles: 

32
33
34
35

Short name: 

SPW01

Methods: 

Aerial mapping: Bison wallows were mapped in 2011 using aerial photographs from Riley County Geographic Information Systems (https://gis.rileycountyks.gov/), and again in 2019 using aerial imagery obtained from the National Agriculture Imagery Program (United States Department of Agriculture Farm Service Agency, Salt Lake City, Utah).  We then used Esri (Environmental Systems Research Institute Inc., Redlands, California) ArcMap to identify wallows at scales of 1:669 (2011) and 1:663 (2019), using a fishnet grid to track areas that had been searched.  A wallow was identified as any oval area with bare or partially bare ground, or with a clearly defined border of vegetation different from that surrounding it.  For the purposes of this study, we used only those wallows with 50% or less plant cover, resulting in the identification of 3,231 wallows in the 2011 dataset and 2,936 wallows in the 2019 dataset.  Because of differences in scale and resolution, data from 2011 and 2019 were analyzed separately. Density of mapped wallows were analyzed based on fire frequency, elevation, and slope.  

Landscape descriptors (frequency of fire, elevation, and slope) were identified using using Esri ArcMap 10.8 software. Fire frequency is part of the overall experimental design of KPBS and is applied to each watershed within the bison-grazed enclosure at intervals of 1, 2, 4, or 20 years. Data on slope and elevation were obtained using a 2-meter digital elevation model generated from Lidar (LIght Detection And Ranging) data. Elevation was classified into quartiles, resulting in four levels of elevation corresponding to 333 to <360, 360 to <388, 388 to <415, and 415 to 443 meters above sea level. Slope was classified into three levels corresponding to 0 to <6, 6 to 12, and >12 degrees, allowing for absorption of small variations in slope into surrounding areas for smoothing purposes. The overlaid combination of fire frequency, elevation quartile, and slope levels defined 4,174 unique area polygons. We then counted the number of wallows in each polygon for the 2011 and 2019 datasets.

Physical characterization: Between 8 June and 13 August 2020, we surveyed a subset of wallows randomly selected from the 2011 dataset.  For each wallow surveyed, we collected two measurements of the longest axis and two measurements of the shortest axis of the wallow. We also took measurements of depth every 61 cm (i.e. 2 feet) along the longest axis of the wallow. Length and width (in meters) of each wallow were defined as the average of the two measurements collected of the longest and shortest axes, respectively. We calculated the surface area, A (m2), of each wallow using an elliptical approximation, such that A = π * (length/2) * (width/2), where π is the mathematical constant 3.14159. Wallow depth (in centimeters) was defined as the median depth measurement along the longest axis. Wallow volume, V (m3), was approximated using the formula for an ellipsoid divided by two, such that V = ½ (4/3 * π * (length/2) * (width/2) * (depth/2)). For each measured wallow, the slope (in degrees) of the surrounding terrain was obtained from ArcGIS data. We also recorded whether the wallow was located on a grazing lawn or not.  A grazing lawn was defined by the presence of short-cropped grasses and abundant forbs.  Finally, we recorded whether the wallow contained any aquatic or terrestrial vegetation in a binary yes/no manner.

Data sources: 

Maintenance: 

complete

Additional information: 

Wallows2011: Data collected by Adam Skibbe and Thomas Kuhn;

Wallows2019: Data collected by Pam Blackmore and Andrew Woodrum;

Wallows2020: Data collected by Kentin Brummett, Micah Dunn, Jake Marsh, Kalea Nippert, Mike Prekopy, John Rhodes, Amelia Richter, and Caden Searcy, who were supervised by Amanda Kuhl and Pam Blackmore.

Pages

Subscribe to RSS - Fire